top of page

Dry Box Body for Mercedes-Benz Sprinter 307

4 days ago
2 min read

We built a dry box body for a Mercedes-Benz Sprinter 307 RWD chassis cab (3.5 t, 4,325 mm wheelbase) — a 23 m³ cargo body with a translucent roof, a rear top flap designed for tail-lift operation and load securing rails on three walls. It was supplied assembled, ready for mounting on the chassis.


The walls and roof are 25 mm sandwich panels with a rigid polystyrene foam core and reinforced Performance Plus WR polyester-glass laminate on both sides, finished in RAL 9016 outside. The roof uses light-transmitting laminate on aluminium omega profiles, so the cargo area gets daylight without extra lamps. The floor is 15 mm birch plywood with a dark brown, moisture-resistant and anti-slip phenolic film on an aluminium profile base, and the body sits on an aluminium intermediate subframe.


Key specifications

  • Dry box body for cargo that needs no temperature control

  • Internal 4,250 × 2,460 × 2,200 mm (23 m³); external 4,300 × 2,510 × 2,240 mm

  • Panel thickness: walls and roof 25 mm, floor 15 mm

  • Anodised aluminium rear portal and exterior corner profiles

  • Rear top flap (693 mm high) opening to 100° on gas springs, designed to work with a rear tail lift platform (1,610 mm); cargo seal kit for the rear portal included

  • No side doors

  • 70 mm aluminium kickplates on the side and front walls

  • Galvanised steel combi rails on both side walls and the front wall

  • LED cargo lighting strips along both sides (4,000 K, IP65) with a push-button switch inside the body

  • LED marker lights on the roof (white front, red rear) and an LED brake light in the rear portal

  • Rear portal prepared for a reversing camera

  • Total equipment weight: 446 kg


The body comes with a 24-month warranty.

Manufactured at Hoobrid's production facility in Eigirgala, Lithuania.




bottom of page